Accordion microphone kit
Microphone kit with installation instructions, modification tips, and alternative installation ideas:
Kit price: $325
The kit is very flexible and can be installed in nearly any accordion. Contact us if you have questions.
I repair and restore accordions for a living (19 yrs) and this system took us nearly three years to develop. All assembly is done by us in the US and the circuit boards are made in the US.
Our system has 5 total condenser microphones, 3 on treble side (right) and 2 on the bass side (left).
Separate volume control and preamp circuit on left and right with mono out.
Powered by a standard 9 volt battery, good for over 700 hours of operation!
The output is a typical 1/4" guitar jack, with your cable, connects directly to your amplifier or sound board with great sound and super ease of use!
Another great feature with our system is a decided lack of feedback squeal!
Includes all wiring and parts needed for a full installation plus wiring diagram and installation tips.
We also offer some phone support (within reason).
To install, you will need:
Solder and a soldering iron
Tacky glue or contact cement
1/4" and 5/8" drill bit and drill
Hot glue or equivalent gap filling glue
Wire cutters/strippers
Pliers
Phillips and flat head screwdrivers
You will need to be familiar with soldering, light electronics, and feel comfortable drilling holes in your accordion.
It takes me about 5 hrs to do a normal install, pictures shown are only an example, your accordion may differ, I have taken many photos of installations so you can look and see what works best in your case.
We can install this system in your accordion for you, contact me for price.